OSTC3 /Import not correct

[faltho]

I want to highlight some issue with the import from a HW OSTC3.

On my dive computer the dive time shown in logbook is 71:22min. When I import this dive to MacDive, the dive time is 76:00min.
In the RAW file of MacDive the depth at 71:22 is 0.82m. The RAW file continuos up to 76:00min with only depth data between 0.82 and 0.00m.

I am using following dive Software and Computer: Heinrich Weikamp OSTC3, Software release 1.70
MacDive: Version 2.3.5
Apple Mac Book Pro: OS X Yosemite

Any idea about this issue ?

Thanks for your replies.

[nick]

The final sample time is used, rather than the bottom time.

There is an option in the next release to change the behaviour to use the device time (for certain devices including the ostc).

Thanks

[Jean-Francois]

The final sample time is used, rather than the bottom time.

There is an option in the next release to change the behaviour to use the device time (for certain devices including the ostc).

Thanks

OMG thank you so much Nick. I won't have to change the bottom times any more.
It is really chrismas then