MacDive Forums

Hi,
I've a Dacor Darwin Air, that is a rebrand of the Mares Airlab. The protocol should also be similar to Mares M1 and Mares M2. Is this computer already supported, maybe with some trick? If not, I can send you all the data that you need to support it, if you want.

Thanks,
Simone

It's not unlikely the protocol is identical to one of the already supported Mares devices. You could try with the "nemo" test app, and if that doesn't work the "puck" app. Instructions to run these test apps are here: http://www.mac-dive.com/forum/viewtopic.php?f=5&t=407

Don't forget to install the correct usb driver first: http://www.mac-dive.com/devices.php

Many thanks.

I will try and report you.

Simone

Hi,
I tried both with Nemo and with Puck, but it does not seem to work. In MacDive I get an error 4, using the command line tool I get other errors regarding unrecognized dive Computer. If you want I can sent you the logs of the command line tools and the dump of an actual communication using Mares IRIS software taken with PortMon.

Simone

Just send me all the files, and I'll have a look.

I've just sent you an email.
Thanks,
Simone